We Fab for Flat Roofers
VIKING METALS
Commercial Gutters and Downspouts
BOX Gutters any length
991 Milledge ave. East Point
Phone 404-669-9100
Fax 404-669-0744
Metalcon
    Please come see us at MetalCon the upcoming week.
        


                                          


                              We will be at booth 1446. We will have samples of all the products we make. We are the one of the top producers of Box Gutters and 4 x 5 downspouts in the country. We can put out over 40,000 feet of a trim a week. We have a full lay out shop and make scuppers and conducters heads of any type of material. Please note we are known for our ability to make commercial gutter and commercial downspouts in any length. We will carry up to 50 feet on our trucks any where in the U.S..
 Any questions please call Doug at 770-861-5855
MORE >>
Posted by Doug craig at 10/2/2009 5:38 PM | View Comments (0) | Add Comment | Trackbacks (0)
New Building
  We have moved to a new building.


  Viking Metals has now moved to a bigger building to meet your needs and to service everyone better. Our New address is 1014 Sampler Way suite D East Point Georgia 30344. Our new building is 32000 square feet . We are now one of the biggest Sheet metal shops in the Southeast. We have added a new 12 foot shear to increase our ability.
  We have the roll formers now to make Half round gutter in 24 gauge kynar, 6 inch Box commercial gutter, 7 inch box gutters , 3x4 corrugated ,and 4 x 5 corrugated downspouts in any length. We can also make any profile on our 21 foot brake.
 Also note we also have a full layout shop we can make conducter heads ,scuppers , square to rounds, chimney caps and just about any thing you might need.
 Please call with any questions 404-669-9100 or my cell 770-861-5855 (Doug).
MORE >>
Posted by Doug craig at 7/28/2009 5:40 PM | View Comments (0) | Add Comment | Trackbacks (0)
Commercial Downspouts and a new truck
   New Truck to quicken our deliveries around the country.

   We have bought a new truck to deliver anything up to 20 feet long. We still have our truck with the large rack to deliver commercial gutter and commercial downspout up to 45 feet long.Please call no matter your location we can get it there. We have been shipping overseas as of late so please call.If your are a commercial roofing and you need metal please call.
MORE >>
Posted by Doug craig at 2/3/2009 6:21 PM | View Comments (0) | Add Comment | Trackbacks (0)
Commercial Downspouts and a new panel machine.
      We have added a new Machine to our shop.
 
--------Multi-panel
         We have bought a Englert multi panel machine to make 1 3/4 snap lock panel.
 Please remember we can make commercial downspouts and gutters in any length out of 24 gauge kynar or Alum.
We can make 6 inch box , 6 inch half round , 7 inch box and 7 inch o.g. gutters in any length in house we will anybody's color. ( Englert, Pac-clad, Ryerson, Mcelroy etc.) 
   Any questions please call 404-669-9100 


MORE >>
Posted by Doug craig at 11/15/2008 9:03 AM | View Comments (0) | Add Comment | Trackbacks (0)
3 x 4 Downspouts Machine now in house
 We know can do 3 x 4 commercial downspout in steel. Our machine came last week from Artos.

 
    We will be able to make 3 x 4 downspout in 26 gauge steel. We can still make 4 x 5 downspout in 24 gauge in any length.
 Also we can make Box gutter in any length.


MORE >>
Posted by Doug craig at 10/13/2008 7:48 AM | View Comments (0) | Add Comment | Trackbacks (0)
Commercial Gutter Downspouts and Metal Con
 Commercial Gutters Downspouts and Metal Con

  We will be at The Metal Con this October. We will be at booth # 419. We will be in the new gutter Pavilion. If you would like some free passes please call the office and I will get you some in the mail. Our number is 404-669-9100
 The link for Metal Con is www.metalcon.com.
 Please come and visit and look at at our box gutters and 4x5 downspouts. We can make gutters and downspout in any length in 24 gauge or .032 alum.. We also will make these will no joints including the elbows in the downspout. We will ship anywhere on our own trucks in long lengths  
 

  

MORE >>
Posted by Doug craig at 9/11/2008 10:34 AM | View Comments (0) | Add Comment | Trackbacks (0)
5 inch and 6 inch elbows
 We now have 5 and 6 inch elbows in 24 gauge and .032 alum..
   If you guys are needing 5 or 6 inch elbows in color please call us. Our number is 404-669-9100. We also have our 21 foot brake going full blast.
Please do not forget we can do 6 inch box gutter and 4 x4 downspouts in any length.
  Also I have updated some of the links. If you would like for us to link to your site please call me at 770-861-5855 and if you link to us we will link back
MORE >>
Posted by Doug craig at 8/6/2008 11:26 AM | View Comments (0) | Add Comment | Trackbacks (0)
ES-1 and Box Gutter
We can make ES-1 coping using anyones colors (pac-clad, Mcelroy,color clad etc). Our ES-1 comes with an engineers stamp. We do not do our testing in our backyard like some other people. Our testing is backed by the NRCA.

 

Do not forget we can make box gutter and 4x5 downspouts in any length and use anyones colors.
MORE >>
Posted by Doug craig at 1/3/2008 1:25 PM | View Comments (0) | Add Comment | Trackbacks (0)
K style Gutter
 We can make K style Gutter in 5",6",7"


 

We can make O.G. style gutter in .032 alum. or 24 gauge kynar steel.
We can make these in any length.We can also make these using anyone colors.We can also make 3x4 downspouts to match or 4" round downspouts to match. If you need chimney caps or conducter heads we can also make those to match.
MORE >>
Posted by Doug craig at 11/10/2007 10:00 PM | View Comments (0) | Add Comment | Trackbacks (0)
21 foot Jorns
 



   We have recieved our 21 foot Jorns (still have to hook it up). We will now be able make all profiles of industrial gutter and box gutters up to 21 foot long. We will also be able to make square downspouts or box downspouts up to 21 foot long. We also use a pipelock for our seam .We will be able to make all smanca profiles. Please do not forget we can make 6 inch box and 7 inch box any length in 24 gauge kynar. We can also make half round gutter in ANY length in copper or 24 gauge steel. Also we are a great choice in you need leader heads or conducter heads. We can also make scuppers in any shape. We are still make 4x5 downpipe in any length.
Doug Craig 770-861-5855
MORE >>
Posted by Doug craig at 11/3/2007 7:13 PM | View Comments (0) | Add Comment | Trackbacks (0)
Older Entries
Copyright . http://VIKINGMETALS.COM. All rights reserved.